When Toxics Meet Metal
Zero-valent iron is an emerging remediation technology that transforms chlorinated solvents to harmless substances. Engineers and researchers have been studying the process for about five...
Big Business
Prior to the 1990s, there were few mergers in the environmental engineering consulting industry. Growth and profitability were generally sufficient to compensate owners and employees and...
Pile Wall Cuts Off Seepage (Available only in Geo/Environmental Special Issue)
An unusual cutoff wall constructed by the secant pile method succeeded in drying up seepage through the permeable strata below a saddle dam at Beaver Dam in Arkansas, owned by the U.S....
Quake Proofing a Palace
A $36.5 million renovation of the California Palace of the Legion of Honor included a two-level underground expansion on a very sensitive site and the largest-ever seismic retrofit for...
New Address for the 21st Century
The purchase of the office building in Reston, Virginia, that will be the society's new headquarters is described. The decision to buy property was made in April 1993, candidate...
Design of Sheet Pile Walls
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 15 From foundation exploration and testing procedures...
Blast Wall Bravura
Since the 1988 disaster on the Piper Alpha platform in the North Sea, which claimed 165 lives, legislation in the United Kingdom has required the operators of offshore installations to...
Guidelines for Evaluating the Performance of Highway Sound Barriers
Prepared by the Highway Innovative Technology Evaluation Center, a CERF Service Center. This report presents the HITEC evaluation plan for U.S. Gypsum's...
Wave Forces on Inclined and Vertical Wall Structures
This monograph,
Engineering a Landslide
A slope failure in northwest Alabama has been stabilized using a system of grouted INSERT piles to provide load transfer across the failure surface of the slide. This system, referred...
Rock Steady
Heavily damaged during the Loma Prieta earthquake, Oakland City Hall had to be repaired and retrofitted. Now Oakland boasts the tallest seismically isolated building in the world. The...
Foundation Upgrading and Repair for Infrastructure Improvement
This proceedings,
Doubling A Pipeline
The 36 in. natural gas pipeline built 32 years ago by Pacific Gas and Electric (PG&E) its subsidiary Pacific Gas Transmission (PGT) from Canadian fields to central California has...
Spacecraft Wall Design for Orbital Debris Impact
This paper describes a method for obtaining the optimal rise angle of corrugated bumpers for the design of space structures in the event of an on-orbit impact. The procedure determines...
Deepwater Waves and Tsunami Produced by the Impacts of Small Asteroids
Studies of ocean sediments may be used to determine when coastal areas have been hit by tsunamis in the past. Tsunami debris has been found to be associated with the Cretaceous-Tertiary...
Concrete Buildings in Regions of High Seismicity
Structural systems for multistory concrete buildings in regions of high seismicity are reviewed. The suitability and certain practical aspects of the systems are discussed. A Uniform Building...
Seismic Design of RC Structural Walls with Unsymmetrical Cross-Sections
An overview of seismic design issues and current experimental research for walls with unsymmetrical cross-sections is presented. The experimental studies include approximately 1/4 and...
Behavior of Foundations Subjected to Large Ground Movements
The behavior of twelve linear test foundations above an advancing longwall coal mine panel was observed. Three phases of deformation were observed in the centerline foundations: tension,...
Composite Walls as Shear Elements in Tall Structures
This paper describes a system of composite walling that can be used as a lateral load resisting system in tall structures. The composite walling comprises two skins of profiled steel sheeting...
Strut-Tie Model Design of Disturbed Regions in Concrete Structures
The design of disturbed (highly non-linear behavior) regions in concrete structures is illustrated using strut-tie approach. The use of this approach assisted with interactive computer...
Return to search