Shotcrete for Underground Support V
This proceedings consists of papers presented at the Engineering Foundation Conference held in Uppsala, Sweden on June 3-7, 1990. They are divided into sections concerned with the design...
Glass Melter Assembly for the Hanford Waste Vitrification Plant
The Hanford Waste Vitrification Plant (HWVP) is designed to solidify high level radioactive waste by converting it into stable borosilicate glass after mixing with glass frit and water....
Carbon-14: Some Evidence of Migration and Experiments on Immobilisation
Carbon-14 that is produced in nuclear reactors by reactions on C, N and O is one of the most biologically dangerous nuclides that are subject to global dispersion (H-3, 85-Kr, 129-I)....
Post-Test Evaluations of Waste Isolation Pilot Plant?Savannah River Simulated Defense HLW Canisters and Waste Form
Eighteen nonradioactive defense high-level waste (DHLW) canisters were emplaced in and subjected to accelerated overtest thermal conditions for about three years at the bedded salt Waste...
Organic Carbon Input in Shallow Groundwater at ?SP?, Southeastern Sweden
The variation in carbon and oxygen isotopes in calcite fissure fillings and dissolved carbonate from shallow groundwaters has been examined at Aspo, southeastern Sweden. The shallow water...
The DOE Waste Acceptance Process for the Vitrified High-Level Waste Form
Borosilicate glass from Defense HLW producers will be emplaced in the civilian radioactive waste repository. Vitrified HLW will be under production before the repository license application...
Instrumentation Requirements for the ESF Thermomechanical Experiments
In situ thermomechanical experiments are planned as part of the Yucca Mountain Site Characterization Project that require instruments to measure stress and displacement at temperatures...
Evaluation of Borosilicate Glass as a High-Level Radioactive Waste Form
The choice of a borosilicate glass as a high-level nuclear waste form is evaluated base on observations of natural and artifical glass hydration and reaction, experimental results of glass...
The Effect of Gamma Irradiation on the Volatility and Redox State of Simulated DWPF High-Level Nuclear Waste Glasses
Gamma-induced volatility of simulated DWPF high-level nuclear waste glasses is highly dependent upon the redox state of the glass. For oxidized glasses with an Fe2+/(Fe2+...
Corrosion Life-Time Assessment of Carbon Steel and Stainless Alloys for Geological Disposal Facility
The disposal facility for radioactive wastes, requires long-term integrity. Metal is considering to use as the engineered barrier which constructs the outer walls in such a facility, in...
Bending of Retrofitted Test Foundation Walls
New repair methodology has been developed for residential construction that can be used to retrofit foundation bearing walls damaged by mine subsidence. The repair strengthens the foundation...
Behavior of Unbonded Braces Restrained by Reinforced Concrete and FRP
A new composite steel brace called an unbonded brace (UB) is proposed to enhance the capacity of a steel brace to carry a compressive load of almost up to the yield strength of the steel...
An Evaluation of Fiberglass Pipe Made by Three Different Manufacturing Processes for use in Water Transmission Projects
Fiberglass pipe is made primarily using continuous filament wound process, discontinuous helical filament wound process, and centrifugal cast process. Some 40 countries around the world...
Plastic Potential
Some 220,000 tons of epoxy-coated steel has been used in the construction of bridge decks since 1987, but some have raised questions about its long-term durability. New materials for prestressing...
Characterization of Man-Made Vitreous Fibers by Image Analysis
This paper deals with the characterization of man-made vitreous fibers (MMVF), seen as an application of the techniques of image analysis and mathematical morphology. We present the whole...
The Use of Structural Composites in 21st Century Infrastructure Technology
The purpose of this paper is to create and transmit a sense of the unique benefits which effective application of composites technology can bring to the civil engineering. infrastructure...
Composite Materials as Concrete Reinforcement in the Next Decade
Polymer matrix composites (PMCs) are researched for possible implementation in the construction industry. A number of factors affect the widespread use of FRP composites in the civil engineering...
Pultruded Composites: Materials for the 21st Century
The main objective of this paper is to introduce pultruded composites to the civil engineers and to create the awareness of its important applications. A description of the pultrusion...
Ups and Downs in Chicago
The Chicago Title and Trust Center�a 50-story mixed-use complex which opened late last year�offers 1.3 million sq ft of above-grade space, and three levels of below-grade parking. The...
Real-Time Condition Monitoring of Concrete Structures by Embedded Optical Fibers
Fiber optic sensor methodology has matured to the point where the impact of this new technology is now evident, especially in aeronautics and space structure applications. External perturbations...
Return to search