Design of Frames Using Notional Horizontal Force
The cantilever columns and portal frames are studied by using the notional horizontal force design concept. This concept intends to eliminate K-factor in the frame design. It was found...
A Nonlinear-Analysis-Based Procedure for Evaluating Load-Carrying Capacity of In-Plane Steel Frames
A simple method based on geometrically nonlinear analysis is proposed to evaluate the load-carrying capacity of a steel structure. The effects of material nonlinearity and residual stress...
Tests of Full-Size Pretensioned AASHTO Beams with Debonded Strands
A summary of an experimental investigation dealing with the effects of strand debonding on the flexure and shear behavior of simply supported pretensioned AASHTO beams with a cast-in-place...
Seismic Retrofit of R/C Columns with Inadequate Lap Splices
This paper presents experimental results on the use of rectangular steel jackets to improve the seismic performance of rectangular steel jackets to improve the seismic performance of rectangular...
Column and Beam-Column Design - A World View
This paper is concerned with the design of columns and beam-columns in steel building frames. Design provisions found in some selected codes viz. AS DR87164 87(Australia), BS5950 Part...
Some Aspects of Compression Member Design in Australia
The paper summarizes and elucidates the provisions of the Australian Standard AS4100-1990, Steel Structures, for the design of compression members. Emphasis is placed on those aspects...
Research of Strength and Deformations with Long-time Loading and the Use of Glassfiber Reinforced Concrete in Shells
Presented is an experimental research on the properties of behavior on compression and tension of glassfiber reinforced concrete of alkali-resistant glass fiber under long-time load and...
Chelating Composite Membrane: Its Application in Selective Heavy-Metal Solid-Phase Separation
Selective removal of small amounts of heavy metals from the background of large amounts of innocuous sludge or slurry is a challenging separation problem. Conventional fixed-bed sorption...
Colloidal Fouling of Reverse Osmosis Membranes
Experiments on the fouling of thin film composite and cellulose acetate reverse osmosis membranes by aluminum oxide colloids are reported. Fouling was significant at high ionic strengths,...
Advances in Cement and Concrete
This proceedings,
Materials for Tomorrow's Infrastructure
A Ten Year Plan for Deploying High Performance Construction Materials and Systems (Executive Report)
Prepared by the Civil Engineering Research Foundation. This executive report presents a high-level, policy-oriented summary of the High-Performance...
Materials for Tomorrow's Infrastructure
A Ten Year Plan for Deploying High Performance Construction Materials and Systems (Technical Report)
Prepared by the Civil Engineering Research Foundation. This report presents a detailed program to transform our nation's infrastructure....
Questioning Composites
Steel, concrete and timber are, of course, the most commonly used construction materials. Composites, or fiber reinforced plastics, have been used in specialty applications in construction...
The French Composite: A Bridge for Normandy
Aside from its record breaking 856 m span, the most important fact about France's 2,141 m Pont de Normandie�the Normandy Bridge�is that it is being built at all. The bridge...
Design and Uses of Reinforced Shotcrete in Underground Projects in Canada
The first use of steel fibre reinforced shotcrete (SFRS) in Canada was using the wet-mix process in the support of deteriorated ground in 80 year old railway tunnels in the Fraser Canyon,...
Technical Note: STC-40 Shotcrete Adhesion In Situ Tester
It is essential that the shotcrete when reinforcing the rock mass achieves a good adhesive bond to the rock surface. The strength of that bond can be controlled by pull out testing either...
Fire Testing of Shotcrete Samples in a Small Furnace
The fire resistance behaviour of 8 shotcrete samples were investigated in a laboratory furnace applying ISO 834 standard test. Shotcrete was applied on 20 to 30 cm thick granite slabs...
Steel Fiber Reinforced Shotcrete?For Rock Support and Fire Protection
Rapid development in concrete technology and development of equipment has led to a change from dry hand-operated to wet robot shotcreting in Norway. Shotcrete of more than 100 MPa cube...
Use of Long, Variable Length Steel Fibres in Shotcrete
Steel wires are cut to fibres in a shotcrete nozzle and directly incorporated in the ejected shotcrete. Long and variable length fibres can be used. The fibre material is better utilized...
Various Techniques for Fiber Reinforcement
Placing wire netting in thin shotcrete layers was found to be a difficult, dangerous and time-wasting method. Searching for other ways to reinforce the concrete, it has been found that...
Return to search