What�ll They Think of Next? Dewatering Contaminated Slurries Using Geotextile Tubes
Sediment must be dredged from the bottom of waterbodies to maintain their capacity and navigability. Dredging, by its nature, involves the removal of highwater-content slurries and also helps preserve...
Sediment Pollution: Solving "Rill" Problems Using RECPs
Sediment pollution causes an estimated $16 billion in environmental damage annually. Sediment is the most common pollutant in rivers, streams, lakes, and reservoirs, causing such negative effects as temperature...
70 Years of Soil-Bentonite Slurry Walls: So, What's New
The soil-bentonite slurry wall (SBSW) is an established ground improvement technology that continues to find applications. It�s often the best and most economical vertical barrier to essentially stop lateral...
Adventures in Managing Water
Real-World Engineering Experiences
Sponsored by the River Basin Planning, Policy, and Operations Technical Committee of the Planning and Management Council of the Environmental and Water Resources Institute of ASCEAdventures in Managing...
Perfluorinated Chemical Contamination in Drinking Water Raises Concerns in Congress
Shortly after a House subcommittee examined the issue of perfluorinated chemicals in drinking water, a group of Michigan representatives introduced legislation intended to encourage federal agencies to...
Nurturing Nature
A zero-emission, zero-waste resort that joins facilities for ecotourism with those for scientific research is proposed as an antidote for overfishing, mass tourism, and pollution in the Philippines....
Geotechnical Risk Management: The Five Non-Technical Topics that are Crucial for the Successful Practice of Geotechnical Engineering
It is fair to state that the aspects of civil design and construction referred to as geotechnical engineering can be characterized as inherently risky. Geologic processes are complex,...
Becoming Greener with Green Sand: An Iron Castings Company Devises an Environmentally Friendly Liner System Reusing Foundry Byproduct
Metalcasting is one of the oldest methods of recycling�humans have a few millennia worth of experience with the technique�but today's industry still battles public preconceptions...
Innovative Use of a Groin Structure: Saving Cost, Shortening the Schedule, and Minimizing Impacts
Almost any type of construction activity can pose a shock to the surrounding environment and habitat. Obviously, the extent of the impact will depend on the location of the project and...
Measurement of Hydraulic Conductivity of Partially Saturated Soils
Increased interest in protection of the environment has led to a need to be able to predict long-term movement of moisture, and contaminants, in the vicinity of shallow land disposal sites...
The Best Surprise is No Surprise: The Geotechnical Engineer's Ethical Responsibility to Say No to Bidding
The subsurface characterization work that a geotechnical engineer must perform is critical to the success of every project that requires the cooperation of the ground, regardless of whether...
Transbay Transit Center: Innovations in Automated Monitoring
The new Transbay Transit Center will include a multimodal terminal serving 11 transit systems and future high-speed rail from San Francisco to Los Angeles/Anaheim. This is an ambitious,...
Pioneers In Groundwater Session with Christine Shoemaker
Selected in recognition of her contributions to groundwater management and remediation, global optimization, and watershed protection, Christine Shoemaker presents on her experiences and...
Design of Urban Stormwater Controls
Fully updated to address the paradigm shift in the way stormwater is viewed and managed, Design of Urban Stormwater Controls focuses on consolidating technologies to foster a convergence...
Geotechnical Considerations in Grouting Program Planning
This chapter explores geotechnical considerations in grouting program planning. Topics include: basic considerations; geotechnical investigation and geotechnical design summary; grouting...
Watershed-Based Permitting ? A Myth or Reality?
The United States Environmental Protection Agency has promulgated the Total Maximum Daily Load process to achieve the goals of the Clean Water Act. The TMDL processis applied to water...
Groundwater Flow Model Development at the Nevada Test Site
The Underground Test Area Project (UGTA) of the National Nuclear Security Administration.s Nevada Site Office is in the process of assessing and developing regulatory decision options...
Transport Model Uncertainty and Sensitivity Analysis for Groundwater Releases of Radionuclides from Subsurface Nuclear Tests
Uncertainty analysis of groundwater flow and transport models is a topic of considerable interest in the groundwater modeling communities. The Underground Test Area (UGTA) Project of the...
Coupling Physical, Chemical, or Biological Methods for Innovative Groundwater Remediation Coupled Polymer Floods and Bio-Chemical Remediation Techniques for Enhanced Groundwater Treatment
Many groundwater remediation techniques are designed to remove or destroy contaminants
Mapping Aquifer Zones Based on Microbial Ecology and Geochemistry in a Landfill Leachate Plume with a Self Organizing Map
We implemented a self-organizing map to delineate aqueous geochemistry and microbial ecology in landfill leachate. In subsurface ecosystems microorganisms mitigate a myriad of chemical...
Return to search