American Society of Civil Engineers

CEDB Search Results

To start your search, enter one or more words for each category you are interested in.
For help, click on the name of the Field(s) you want to use.
Document Type
Serial Title
All Text Fields
Subject Headings  
Year Range Start Year:   End Year:

Found 990 Records with the keyword term of "Bending"

Displaying 100 records - please modify your search for better results.

2015  Allowable Bending Fatigue Stress of Rails

2015  Cable Replacement Method for Cable-Stayed Bridges Based on Sensitivity Analysis

2015  Design of Cold-Formed Lean Duplex Stainless Steel Members in Combined Compression and Bending

2015  Fatigue Testing and Performance of Welded Single-Support Bar Modular Bridge Joints

2015  Field Verification of Simplified Analysis Procedures for Segmental Concrete Bridges

2015  Performance of Concrete Beams Reinforced with Basalt FRP for Flexure and Shear

2015  Seismic Behavior of RC Shear Walls Strengthened for In-Plane Bending Using Externally Bonded FRP Sheets

2015  Short-Span and Full-Scale Experiments of a Prefabricated Composite Floor-Building System

2015  T-Tail Flutter Analysis with Simulated Fuselage Stiffness

2015  Ultimate State of Thin-Walled Circular Steel Columns Subjected to Biaxial Horizontal Forces and Biaxial Bending Moments Caused by Bidirectional Seismic Accelerations

2015  Withdrawal Strength and Bending Yield Strength of Stainless Steel Nails

2014  Aging Influence on Rheology Properties of Petroleum-Based Asphalt Modified with Biobinder

2014  Analysis of Settlement-Induced Bending Moments in Battered Piles

2014  Bend Strength of Complete Closed-Type Carbon Fiber-Reinforced Polymer Stirrups with Rectangular Section

2014  Closed-Form Solution for a Cantilevered Sectorial Plate Subjected to a Tip Bending Moment

2014  Displacement and Strain Field Measurement in Steel and RC Beams Using Particle Image Velocimetry

2014  Eccentricity-Based Optimization Procedure for Strength Design of RC Sections under Compression and In-Plane Bending Moment

2014  Exact Solutions for Stresses, Strains, Displacements, and Stress Concentration Factors of a Perforated Rectangular Plate by a Circular Hole Subjected to In-Plane Bending Moment on Two Opposite Edges

2014  Experimental Analysis of Bending Resistance of Bamboo Composite I-Shaped Beam

2014  Experimental Analysis of the Structural Behavior of Timber-Concrete Composite Slabs made of Beech-Laminated Veneer Lumber

2014  Experimental Investigation of Longitudinal Bending of Buried Steel Pipes Pulled through Dense Sand

2014  Extradosed and Intradosed Cable-Stayed Bridges with Continuous Cables: Conceptual Consideration

2014  Identification of the Short-Term Full-Section Moduli of Pultruded FRP Profiles Using Bending Tests

2014  Investigation of Nonlinear Bending Analysis of Moderately Thick Functionally Graded Material Sector Plates Subjected to Thermomechanical Loads by the GDQ Method

2014  Numerical Analysis of Pressurized Cold Bend Pipes under Bending to Investigate the Transition from Compression to Tension Side Failures

2014  Simplified Design Equations for Joints in Buried Flexible Pipes Based on Hetényi Solutions

2014  Strength Values of Cementitious Materials in Bending and Tension Test Methods

2014  Transient Beam Response due to Point-Load Impact and Estimation of Onset of Yielding in Bending

2014  Uniformly Loaded, Rotationally Restrained Rectangular Plate and Corner Singularities

2013  Analysis of Bending Test of 40" X70 Line Pipe

2013  Analysis of Three Thin-Walled Box Beams Connected at a Joint under Out-of-Plane Bending Loads

2013  Analytical Bond Model for GFRP Bars to Steel Fiber Reinforced Self-Compacting Concrete

2013  Bending Performance of Box-Based Cross-Laminated Timber Systems

2013  Bending Properties of Wood I-Sections Fabricated with Screws and Polyurethane Adhesive

2013  Bending Solutions of the Timoshenko Partial-Interaction Composite Beams Using Euler-Bernoulli Solutions

2013  Bending Strength of a Horizontally Curved Composite I-Girder Bridge

2013  Buckling of Stiffened Antisymmetric Laminated Plates

2013  CFRP Anchor for Preventing Premature Debonding of Externally Bonded FRP Laminates from Concrete

2013  Combined Shear and Bending Behavior of Joints in Precast Concrete Segmental Beams with External Tendons

2013  Design of Steel Shear Connections for Eccentricity as a Result of Secondary Bending Moment

2013  Design Results of RC Members Subjected to Bending, Shear, and Torsion Using ACI 318:08 and BS 8110:97 Building Codes

2013  Effect of Manufacturing Factors on Technological Properties of Plywood from Northern Turkey and Suitability of Panels for Use in Shear Walls

2013  Estimation of Design Parameters for Braced Excavation: Numerical Study

2013  Evaluation of Stiffness and Fatigue Using 2 Point Bending and Indirect Tensile Fatigue Tests

2013  Experimental Behavior of Nonconforming RC Columns with Plain Bars under Constant Axial Load and Biaxial Bending

2013  Experimental Investigation and Design Method Research on Low-Rise Cold-Formed Thin-Walled Steel Framing Buildings

2013  Experimental Investigation and Direct Strength Design of High-Strength, Complex C-Sections in Pure Bending

2013  Field Performance of Corrugated Steel Plate Road Culvert under Normal Live-Load Conditions

2013  Fire Resistance of Cross-Laminated Timber Panels Loaded Out of Plane

2013  Flexural Strength of Cement Paste Beam under Chemical Degradation: Experiments and Simplified Modeling

2013  Fracture Mechanisms of Polymer Cement Mortar: Concrete Interfaces

2013  Golden Ratio in the Crack Pattern of Reinforced Concrete Structures

2013  Impact of Millimeter-Size Silicon Microchips on the Mechanical Properties of Polymer Samples Tested under Flexural Bending, Long-Term Creep, and Impact Conditions

2013  Lateral-Torsional Buckling Analysis of Arches Having In-Plane Rotational End Restraints under Uniform Radial Loading

2013  Local Buckling Analysis of Restrained Orthotropic Plates under Generic In-Plane Loading

2013  Longitudinal Bending and Failure of GFRP Pipes Buried in Dense Sand under Relative Ground Movement

2013  Mechanisms of Aging-Induced Modulus Changes in Sand under Isotropic and Anisotropic Loading

2013  Nonlinear Constitutive Model for Axisymmetric Bending of Annular Graphene-Like Nanoplate with Gradient Elasticity Enhancement Effects

2013  Patching Asymptotics Solution of a Cable with a Small Bending Stiffness

2013  Performances of Large-Diameter Cast-in-Place Concrete Pipe Piles and Pile Groups under Lateral Loads

2013  Rigid Spread Footings Resting on Soil Subjected to Axial Load and Biaxial Bending. I: Simplified Analytical Method

2013  Rigid Spread Footings Resting on Soil Subjected to Axial Load and Biaxial Bending. II: Design Aids

2013  Settlement of Piled Rafts with Different Pile Arrangement Schemes via Centrifuge Tests

2013  Structural Behavior of Symmetric Spindle-Shaped Tensairity Girders

2013  Trenching and Elevating Models of Cased Insulated Flowline with Nonlinear Bending Stiffness

2013  Ultimate Strength of Reinforced Concrete Circular Members Subjected to Axial Force, Bending Moment, and Shear Force

2012  Bending Fatigue Test and Interlayer Pavement Models for Beams of Asphalt Mixture

2012  Characterization of Epoxy Resin Including Strain Rate Effects Using Digital Image Correlation System

2012  Cyclic Quasi-Static Testing of Hollow Structural Section Beam Members

2012  Direct Strength Design of Cold-Formed C-Sections for Shear and Combined Actions

2012  Elastic Analysis of Beam-Wall Joints Subjected to Out-of-Plane Bending

2012  Experimental and Analytical Investigation of Service-Load Stresses in Cellular Beams

2012  Inelastic Bending Capacity of Cold-Formed Steel Members

2012  Influence of Slenderness on High-Strength Rectangular Concrete-Filled Tubular Columns with Axial Load and Nonconstant Bending Moment

2012  Large Deflection Analysis of Plates Stiffened by Parallel Beams with Deformable Connection

2012  Large Deflection of Thin Plates in Convex or Concave Cylindrical Bending

2012  Large-Diameter Pipe Subjected to Landslide Loads

2012  Low Temperature Fracture Properties of Polyphosphoric Acid Modified Asphalt Mixtures

2012  Mechanical Property Analysis of Light Railway Trough Girder Subjected to Combined Bending and Torsion

2012  Parametric Study of the Use of Strain Softening/Hardening FRC for RC Elements Failing in Bending

2012  Performance Based Design Approach for RC Square Bridge Columns under Combined Loadings Including Torsion

2012  Prediction of Bending Strength in Oak Beams on the Basis of Elasticity, Density, and Wood Defects

2012  ReLAM: Nonlinear Probabilistic Model for the Analysis of Reinforced Glulam Beams in Bending

2012  Restrained Bending Fatigue Design of Bridge Cables

2012  Simulation of Unreinforced Masonry Beams Retrofitted with Engineered Cementitious Composites in Flexure

2012  A Study on the Working Performance of Dowel Bars with Horizontal Installation Errors

2012  Three-Dimensional Hydromechanical Sectional Analysis of Cracked Nonprismatic Concrete Spillway Piers

2012  Transverse Joint Details with Tight Bend Diameter U-Bars for Accelerated Bridge Construction

2012  Vierendeel Bending Study of Perforated Steel Beams with Various Novel Web Opening Shapes through Nonlinear Finite-Element Analyses

2011  Behavior of Cold Bend Pipes under Bending Loads

2011  Bending Behavior of Jointed Ductile Iron Pipelines

2011  Bending of Delaminated Composite Conoidal Shells under Uniformly Distributed Load

2011  Buckling Analysis of Nonuniform and Axially Graded Columns with Varying Flexural Rigidity

2011  Cyclic Performances of Shear Connectors

2011  Design Field Bending Moment Coefficients for Interior Reinforced Concrete Flat Plates

2011  Effect of Induction Bending on 360 MPa Spiral Submerged-Arc Weld Pipe

2011  Elemental Bending Test and Modeling of Shear Bond in Composite Slabs

2011  Estimation of Tension in Cables with Intermediate Elastic Supports Using Finite-Element Method

2011  Fatigue Evaluation of Rib-to-Deck Welded Joints of Orthotropic Steel Bridge Deck

2011  Fatigue of Concrete Beams Strengthened with Glass-Fiber Composite under Flexure