Processing Induced Warpage in Composite Cylindrical Shells

Project Delivery Systems: Changing at Warp Speed

Stiffness Matrix Formulation For Anisotropic Beams

Finite Element and Simplified Methods for Analysis of Thin-Walled Composite Open Sections

Fiber Composite Warp for Rehabilitation of Concrete Structures

A Method for `Warped Surface' Land Forming Design
Most approaches to land forming are based on a plane surface design which in some cases may result in prohibitive costs or excessive removal of top soil....

Thin Wall Section Properties by Graphical Integration

Effects of Joint Moments and Warping on Stability

Interactive Specification of Partial Warping Restraint

Flexural-Torsional Buckling of Curved Members

An Inelastic Constitutive Model for Fabrics

Natural Frequencies of Curved Girders
A general finite element displacement formulation is presented to determine the natural frequencies of spatial thin-walled curved girders including the warping contribution. Also included...

Predicting Torsional Response of Thin-Walled Open RC Members
Procedures for calculating the torque-twist response of thin-walled open reinforced concrete members are presented. Traditional theories for predicting the warping torsion response of...

Torsion and Computed Ultimate Loads of H-Columns
Ultimate moment capacities of H-columns with or without flexural end restraints have been computed by two methods—one including the effects of torsion and warping, the other ignoring them....

Warping Restraint in Three-Dimensional Frames
The general solution of the restrained warping of beams in three-dimensional frames has been developed. The general beam strain-displacement relations are used in developing a finite element...

Restrained Warping in Free-Standing Staircases
This paper reports the results of a study investigating the role of restrained warping stresses in the behavior of a two perpendicular flight, free-standing staircase. This paper verifies...

Matrix Formulation of Curved Girders
Exact solutions to the linear static behavior including warping torsion of thin-walled spatial curved beam structures are obtained by the displacement formulation through the use of minimum...

Torsion of Solid and Hollow Rectangular Beams
The derivation of an expression for the St. Venant torsional stiffness of a beam of variable torsional rigidity is given, and this is applied to the evaluation of this stiffness for tapering...

Torsional Stiffening of I-Girder Webs
The torsional response of box stiffened I-sections has been predicted by two analytical procedures. These methods utilize basic torsion theory and compatibility relationships. One method...

Torsional Stresses in Circularly Curved Bars
Mathematical formulations and numerical solution techniques are presented for the uniform torsional and constrained warping stress analyses of a composite and anisotropic circularly curved...

 

 

 

 

Return to search