Reliability of Degrading Dynamic Systems with Applications
A method is developed for the reliability analysis of degrading systems subject to random excitation. Elasto-plastic systems with degrading stiffness, thin plates with cracks and Daniels...
Reliability Analysis of Degrading Elasto-Plastic Oscillators
A method is developed for calculating the probability (reliability) that the total plastic displacement of an elasto-plastic oscillator does not exceed a critical level during a reference...
An Exact Expression for the Distribution of Linear Combinations of Uniform Random Variables
Structural dynamic analysis have often in the past relied on the assumption that the system under consideration is well known ahd have been associated the unpredictability of the response...
Stiffness and Damping Coefficients of Foundations
Load-Deflection Performance of FRP Grating-Concrete Composites
Local/Global Stiffness Matrix Formulation for Anisotropic Multilayered Structures
A Prestressed Kevlar/FRP Structural System: Effects of Cable, Post and Main Member Stiffness
Analysis of Soil-Stress Cell Interaction
Static loading experiments conducted on a soil stress cell embedded in a sand are presented. Stress cell performance was evaluated by comparing the indicated stress against the expected...
Influence of Soil-Pipeline Stiffness on Bending Stresses from Surface Loading
Accurate Response Analysis of Seismic Distributed Mass Systems
A dynamic analysis technique of distributed mass structures is presented with a combination of the dynamic load factor approach and the dynamic stiffness matrix method. The dynamic stiffness...
Stiffness Optimization Methods for Lateral Systems of Buildings: A Theoretical Basis
The sizing of the members of the lateral resistance system for multi-story buildings is often controlled by stiffness requirements. In order to achieve economical buildings, it is important...
A Parallel Fron Large-Scale Stris
A methodology for large-scale structural analysis using a parallel frontal solution algorithm is developed and implemented on the Alliant FX/80 Multiple Instructions Multiple Data (MIMD)...
Developments in the Use of Cubic B-Splines in the Compound Strip Method
A general cubic B-spline compound strip method (BCSM) has been developed to analyze thin plates, stiffened plates, folded plates, and box-girders. In the BCSM a problem is first partially...
The Weighted Integral Method for Calculating the Stochastic Stiffness Matrix of Stochastic Systems
This paper introduces the 'weighted integral method' for calculating an exact expression of the stochastic stiffness matrix of a stochastic structure. Using this...
Minimum Required Lateral Stiffness of Structures
In this paper an approximate method is presented to calculate the minimum lateral stiffness required to insure global structural stability. The technique is based on setting the critical...
Reliability of Beams on Uncertain Foundation
A two phase approach is developed to evaluate the reliability of a finite linear elastic beam subject to a random point load on uncertain elastic foundation. In phase 1, an approximate...
Response Variability and Reliability of Stochastic Systems Using the Weighted Integral Method
After obtaining an exact expression of the stochastic stiffness matrix in terms of random variables called weighted integrals, the response variability and the safety index of stochastic...
Buckling Loads of Columns Made of Viscoelastic Materials
This is about the developing of relationships for predicting the change of buckling loads of columns made of viscoelastic materials under different loads. When a columnlike structural...
Free Vibration of Stepped Beams
This paper addresses the free vibration of a stepped Euler-Bernoulli beam using dynamic flexibility methods. The characteristic equation of the system is derived, from which the system...
Finite Element Stability of Eccentrically Stiffened Plates
A finite element model is developed to investigate the elastic stability of eccentrically stiffened rectangular plates. The formulation is based on the behavior of the plate-stiffener...
Return to search