Bolt Group Pullout: Introduction
This chapter introduces the subject of bolt group pullout....
Bolt Group Pullout
This chapter discusses the tabulation of bolt group pullout data in Microsoft Excel....
Bolt Group Pullout
This chapter discusses the tabulation of bolt group pullout data in Microsoft Excel....
Bond Characteristics of Embossed Steel Elements
Short Term Pullout Tests of Geogrid in a Compacted Lateritic Soil
Interaction Between Soil and Geotextile Reinforcement
Measurement of Bond Performance; Correlation of Pull-Out Strength with Transfer Length
Bond of FRP Rods Embedded in Concrete
Numerical Evaluation of the Breakout Force of Embedded Objects in Cohesive Seafloor Soils
Earth Pressure on Pipelines in Centrifuged Models
Modeling of Fiber Pullout in Cement Based Composites Using an R-Curve Approach
Technical Note: STC-40 Shotcrete Adhesion In Situ Tester
It is essential that the shotcrete when reinforcing the rock mass achieves a good adhesive bond to the rock surface. The strength of that bond can be controlled by pull out testing either...
Drilled Shaft Friction Evaluation via Pullout Tests
The history, development, and field test results of a small-scale 'pullout' test to assess the skin friction (fsu) for drilled shafts socketed in...
Behavior of Suction Piles in Sand
In the marine environment, use of suction pressure for the installation of sealed top piles (suction piles) is a promising alternative to driven pile foundations, particularly in deep...
Experimental Investigation of Self-Tapping Fasteners for Attachment of Corrugated Cladding Panels to Pultruded Fiber-Reinforced Plastics Beams in Industrial Building Construction
This paper describes an experimental investigation of self-tapping fasteners for the attachment of corrugated fiber-reinforced plastics (FRP) cladding panels to pultruded FRP beams. Although...
Factors Influencing Passive Pullout Resistance
Pullout Testing of High-Strength Concrete Members
An experimental investigation of a high-strength concrete mixture was undertaken to measure and evaluate pullout and compressive strength properties. Two columns, a slab, and cylindrical...
Determination of Interfacial Shear and Normal Stresses in Fiber Pull-Out
In this paper we present an improved formulation for the pullout problem, wherein both the effects of fiber end condition and interfacial and frictional shear stresses are considered....
Computer Modelling of Concrete Cover Effect on the Behavior of Fiber Concrete Subjected to Monotonic Pullout
The objective of this paper is to evaluate the concrete cover effect on the bond behavior of bars embedded in normal and fiber reinforced concrete. Nonlinear finite element analysis is...
Studies of the Interfacial Properties of Fiber Reinforced Cement
The multiple fiber pull-out tests were conducted with steel wires and alkali resistant glass fiber strand in order to characterize the behavior of interface of fiber and cementitious matrix....
Return to search