Putting Polystyrene to Work
Geofoam, the generic name for block or low density cellular plastic foam solids used in geotechnical applications, has low density and good insulation properties, which makes it well suited...
Minneapolis/St. Paul International (MSP) Part 150 Implementation Design Overview
In February 1991, Matropolitan Airports Commission (MAC) selected the consulting team of Aviation Planning Inc., Wyle LAboratories Inc. and the Center for Energy and the Urban Environment...
Microbiologically Induced Corrosion
Researchers investigating a building whose columns bled a colorless liquid found that the building was under attack by microorganisms. A community of bacteria had contaminated the fireproofing...
Aerogel?A Transparent, Porous Superinsulator
Silica aerogel is an unusual, transparent, low density, thermally insulating solid useful for a variety of applications. We have been investigating silica aerogel for use in transparent...
Numerical Analysis of Frost Shields
The term 'frost sheilding' has been used to describe the practice of using flat stock rigid insulation materials burial above a water or sewer pipe to reduce...
Use of Rigid Insulation Below Grade for Roadways and Parking Areas
Minnesota Power's Herbert Service Center is located 3 miles north of downtown Duluth, Minnesota. The facility, constructed in 1967, consists of primary buildings, cold storage...
Transmission Line Insulator Assembly Reliability
Transmission line insulator assemblies made up of ceramic or composite insulators and associated hardware are used to mechanically support and electrically isolate energized conductors...
Current Developments in Reinsulating/Waterproofing Underground Steam Mains in New York City
The objective of Con Edison's reinsulation project is to develop the materials and technology necessary to reinsulate those steam distribution mains having excessive thermal...
Nature's Solutions to Space Insulation
Humans working or living in the harsh environment in space must be protected from temperature extremes. Any effective insulating system must be able to withstand a wide range of temperatures....
Digestor Do-Over
Digesters at 6 Orange County (Calif.) wastewater treatment plants needed drastic odor control rehabilitation. Repairs included epoxy patching to cracked domes, installation of a geomembrane...
Design of Tension Member Insulated Anchor for Arctic Pipelines
This paper explores the latest development in above-ground waterflood pipe anchors currently being used on the SOHIO operated portion of the Prudhoe Bay Oil Field. The objective of the...
Lessons Learned From Examination of Membrane Roofs in Alaska
During 1984 and 1985 airborne infrared roof moisture surveys were conducted of membrane roofs at Army installations in Alaska. Many of these roofs were also visually inspected and cored...
Moisture Effects on Extruded Polystyrene Insulation
The amount of moisture within the insulation was determined by carefully weighing each sample and then measuring its volume. Two methods of measuring thermal conductivity were used. The...
The Evolution of a Factory Insulated Piping System
This paper reviews the developments over the past fifteen years in a factory insulated high density polyethylene piping system that has become a standard for sewage and water piping systems...
Insulation Performance Beneath Roads and Airfields in Alaska
Evaluations of the long-term thermal performance of installations in Alaska for frost heave control have included sampling and testing of the insulations to determine the retained thickness,...
Designing for Shock Resistance
If a product or structure is subject to shock loadings, and is unable to take them without unacceptable damage, it must be insulated from the shock. The decision may be to redesign the...
Longitudinal Prestressed Piping for District Heating
The design of recently installed hot water district heating systems in the United States is based on similar systems developed in Europe. Longitudinal prestressing is used in the design...
Insulative Lightweight Concrete for Building Walls
Research is currently being conducted to develop a portland cement concrete for use in low-rise building walls that will combine the structural, thermal insulating, and heat storage capacity...
Building Condition Assessment�An Owner's Perspective
The Port Authority of New York and New Jersey has recently instituted a program to inspect all of its buildings structures to insure structural integrity and public safety and to provide...
Construction Research Applied to Practice
The five papers compiled in these proceedings of the ASCE technical session Construction Research Applied to Practice represent important contributions to the construction industry. Four...
Return to search