Design of Municipal Wastewater Treatment Plants
Fully revised and updated, this three-volume set from the Water Environment Federation and the Environmental and Water Resources Institute of the American Society of Civil Engineers presents...
Some Case Histories of Pile Foundations in Permafrost
Foundations for permafrost conditions should conform to one of three basic design principles: keep it frozen, let it thaw, or thaw the ground before construction. To keep the permafrost...
Design of Municipal Wastewater Treatment Plants
This revised manual, updated from the previous edition, aims to be the principal reference of contemporary practice for the design of municipal wastewater treatment plants. The manual...
An Update on Surface Renewal Estimation of Evapotranspiration
The surface renewal (SR) method for estimating sensible heat flux density (H) has been shown to give good estimates of evapotranspiratiou (ET) when used in an energy balance equation with...
Reductive Pyrolysis for the Destruction of Chloromethane: A Reaction Pathway Model Based on Thermodynamic and Thermokinetic Considerations
Among various thermal technologies available for the destruction chlorinated hydrocarbons, incineration, catalytic hydrogenation, and pyrolysis are important. Pyrolysis employed under...
An Object-Oriented Approach to PC Finite-Element Solutions
A methodology for developing a finite-element program with a variety of applications within civil engineering is presented. Application include simple structural analysis, groundwater...
Reducing Wastewater Sludge Pathogens Using Heat Treatment
The feasibility of using waste heat to reduce pathogen densities in wastewater sludge at a municipal wastewater treatment plant was investigated. Two modifications to an existing two stage...
Process Selection for Treatment of SOC Contaminated Waters
The most inexpensive method for treating synthetic organic chemical (SOC) contaminated wastewaters was studied. Air stripping, liquid-phase adsorption, fixed-film biological oxidation,...
Impact of GOES Data on Surface Heat Flux Predictions
Surface heat flux is the required input for the Great Lakes Forecasting System (GLFS) in order to predict three dimensional temperature structure of the Great Lakes. Since the flux is...
Hanford Waste Vitrification Project Overview and Status
The Hanford Waste Vitrification Project (HWVP) is being constructed at the U.S. Department of Energy's Hanford Site in Richland, Washington. The paper gives an overview of the HWVP which...
Human Factors Engineering Program Plan for the Hanford Waste Vitrification Plant
The paper describes the overall human factors program plan while providing more specific information regarding the critical areas of criteria development, dispersed control areas and key...
The Impact of Safety Analyses on the Design of the HWVP Vitrification Plant
Accident analyses are being performed to evaluate and document the safety of the Hanford Waste Vitrification Plant (HWVP). The effects of worst-case accident scenarios are evaluated by...
Application of Monte Carlo Neutron Photon to Hanford Waste Vitrification Plant Design Analysis
The Monte Carlo Neutron Photon (MCNP) computer program ('MNCP - A General Monte Carlo Code for Neutron and Photon Transport, Version 3A') (in PC and mainframe versions) has been used for...
Installation and Routing of Critical Embedments at the Hanford Waste Vitrification Plant
During the preliminary design phase of the project, a study was conducted to develop concepts for routing embedded piping and conduit between the remote cells and the service corridors...
Glass Melter Assembly for the Hanford Waste Vitrification Plant
The Hanford Waste Vitrification Plant (HWVP) is designed to solidify high level radioactive waste by converting it into stable borosilicate glass after mixing with glass frit and water....
Mechanical Design of the Storage Tubes in the HWVP Canister Storage Building
Canisters of high-level waste from the Hanford Waste Vitrification Plant (HWVP) will be stored in an adjacent facility, the Canister Storage Building (CSB). The canisters are stored vertically...
Heat and Vapor Transport Beneath an Impermeable Cap
Vadose-zone moisture transport near an impermeable barrier has been under study at a field site near Albuquerque, NM since 1990. Moisture content and temperature have been monitored in...
Modeling of Strongly Heat-Driven Flow Processes at a Potential High-Level Nuclear Waste Repository at Yucca Mountain, Nevada
Two complementary numerical models for analyzing high-level nuclear waste emplacement at Yucca Mountain have been developed. A vertical cross-sectional (X-Z) model permits a realistic...
Implications of Stability Analysis for Heat Transfer at Yucca Mountain
An analytical solution has been obtained to the stability problem for an infinite horizontal layer of gas with its humidity constrained to 100%. Latent heat transfer makes convective heat...
A Galerkin Method for the Convection?Diffusion Equation Using Asymmetric Weighting Functions
A variation of the Petrov-Galerkin method of solution of a partial differential equation is presented in which the weight function applied to the time derivative term of a one-dimensional...
Return to search