A Fatigue Reliability Model for Railway Bridges
A fatigue reliability model is described for safety evaluation of steel railway bridges. The model is a function of six independent random variables and can accommodate different types...
A Stochastic Approach to the Fatigue Reliability
In this paper, the stochastic approach, which combines the mixed boundary integral equation method (Lua et al (1992a)) with the First Order Reliability Method (FORM), is applied to study...
Fatigue Life Variability and Reliability Analysis of a Wind Turbine Blade
Wind turbines must withstand harsh environments that induce many stress cycles into their components. A numerical analysis package is used to illustrate the sobering variability in predicted...
Fatigue Strength of Welded Joints Under Broadband Loadings
Twelve welded high strength steel cruciform specimens were tested under stochastic loadings to determine the influence on fatigue life of the bandwidth of the loading process. Constant...
Low-Cycle Fatigue Prediction for Ramberg-Osgood Type Materials
The prediction of low-cycle fatigue crack growth is successfully made by an equation employing the J-integral range. This equation, originally proposed by Dowling and Begley, is analogous...
Fatigue/Fracture Reliability and Maintainability of Structural Systems: A Method of Analysis
Fatigue and fracture of structural components are the principal modes of failure for those structural systems that are dominated by tensile dynamic (oscillatory) loads. As the structure...
TLP Fatigue Due to Second-Order Springing
For offhsore oil production in water depths beyond 300-350 m, the tension leg platform (TLP) has become an increasingly popular design concept. The TLP is a floating structure with excess...
A Non-Gaussian Fatigue Model for Offshore Structures
Fatigue damage accumulation in members of offshore structures can be affected by various aspects of the non-Gaussian response stress time history induced by the nonlinear/non-Gaussian...
Risk Based Optimal Fatigue Testing
Optimal fatigue life testing of materials is considered. Based on minimization of the total expected costs of a mechanical component a strategy is suggested to determine the optimal stress...
On the Fatigue Loading for Local Components
Fatigue provisions in the North American Codes for design of highway bridges may not be applicable to the design of local components which are subjected to high axle overloads and dynamic...
Corrosion Fatigue of Deepwater Offshore Materials
Evaluation of the fatigue life of offshore structures operating in depths of up to 10,000 feet (3,048 m) requires knowledge of the combined effect of axial and hydrostatic loading on the...
Characterizing Mode I Fatigue Delamination of Composite Materials
Evaluation of two techniques to characterize fatigue delamination using the double cantilever beam (DCB) specimen are presented. The two techniques were the delamination growth onset (G-N)...
Diagnostic Testing and Repair of Grand Rapids Generating Station's Unit Four
This paper is a case history that discusses diagnosis and correction of a variable pitch propeller type (Kaplan) hydraulic turbine problem. The turbine problem involved fatigue failures...
Plastic Highway Bridges
For highway bridges, composites are most effective in cables and decks. Researchers have developed and tested cables and deck sections for strength and fatigue resistance. Link-type cables...
Assessment of Cyclical Wave Damage for Small Basin Harbors
Since the construction of Oceanside Harbor in Southern California in 1963, continuous wave penetration into the inner harbor has caused significant damage to dock systems, revetments,...
The Effects of Runway Roughness on Aircraft Fatigue Life
A computer code developed within the Flight Dynamics Directorate of the Wright Laboratory was used to simulate the dynamic response of heavy aircraft operating on runways with various...
Durability and Damage Tolerance Evaluations of Jet Transport Structures
Many design considerations are involved in ensuring structural integrity of Boeing jet transports, which have common design features validated by extensive analyses, tests, and service...
Effect of Microporosity on Notched Specimen Fatigue Life
The present work examines notched fatigue performance of aluminum alloy 7050-T7451 thick plate containing microporosity. Open hole fatigue specimens from low microporosity and high microporosity...
Fatigue Reliability of Components Containing Microstructural Flaws
A probabilistic crack growth model is presented in which the different stages of crack growth including the small crack regime are taken into account. The microstructural parameter determining...
Probabilistic Analysis of the Ghonem and Dore Data
A two-state Markov process model for fatigue crack growth is utilized with experimental fatigue crack growth data reported by H. Ghonem and S. Dore to study the effect of stress ratio...
Return to search