Characterization of a Tropical Clay via Dilatometer Tests
A Model of a Granular Assembly as a Structured Material
A Micro-Deformation Model for Dilatancy of Granular Materials
Behavior of Concrete Joints under Cyclic Shear
Predicting Shallow Foundation Settlement in Sands from DMT
The dilatometer test is ideal for predicting the settlement of shallow foundations. It directly measures a modulus of the soil and has been correlated to predict stress history. Recently,...
Evaluation of Dilatometer Method to Determine Axial Capacity of Driven Model Pipe Piles in Clay
The flat Dilatometer (DMT) provides a unique approach to estimate the effective stress axial capacity of driven displacement piles in clay. An investigation using this approach was performed...
Constitutive Equation for Granular Material by Hypoelasticity
Constitutive equations for soil based upon the incremental theory of hypoelasticity are proposed in this paper to account for the stress path dependency and dilatant behavior of soil....
Thermal Strain Behaviour of Clays Cooled to Cryogenic Temperatures
The thermal expansion behaviour of two different types of clays (Boom clay from Belgium and a pure kaolinite-water paste) has been studied in a temperature range from +20? to -150?C (LNG...
Simulation of the Quasi-Static Deformation of 2D Assemblages of Rigid Discs
Although the importance of dilatancy in the constitutive behaviour of granular materials has been recognized for some time, conclusions about its evolution and dependence on different...
Site Characterization of Yorktown Formation for New Accelerator
The design of a new 1700-m long continuous-wave electron beam accelerator facility (CEBAF) in Newport News, Virginia demanded an extensive geotechnical exploration program be conducted...
Some Dilatometer Test Results in Pennsylvania and New York
This paper starts with a brief introduction to the dilatometer and piezoblade. Test results in four different areas are presented. DMT soundings at LR 67057 (Legislative Route numbers...
Deformation Characteristics of Cohesionless Soils from In Situ Tests
This paper is a summary of seven years experience gained by the National Electricity Board of Italy (ENEL), ISMES and Technological University of Turin in assessing these parameters using...
Flat Dilatometer Tests in Calibration Chambers
This paper presents the results of a series of Flat Marchetti's Dilatometer Tests (DMT's) performed in a large Calibration Chamber (CC) on dry Ticino (TS) and...
Dilatometer Tests in Sand
The paper presents two applications of the dilatometer test in sands: control of compaction and determination of constrained modulus. Twelve dilatometer tests were carried out before and...
The DMT - ?hc Method for Piles Driven in Clay
This paper presents a tentative method for evaluating the limiting skin friction f//s for piles driven in clay based on sigma //h'c (horizontal effective stress at the interface...
Dilatometer to Compute Foundation Settlement
Sixteen examples demonstrate how the S. Marchetti dilatometer test (DMT) provides soil compressibility data for the rapid calculation of foundation settlements with an average ratio of...
Use of In Situ Tests in Geotechnical Engineering
In the past ten years, many new types of in situ test equipment and many new techniques have been developed. The papers in this volume are concerned with applications of in situ measurement...
A Flat-Dilatometer Study of Lateral Soil Response
The effect of flat dilatometer penetration on the lateral stress conditions in soil around the dilatometer blade and the soil response against dilatometer diaphragm deflection were investigated...
A High-Order Theory of Laminated Shells
Nonlinear Dynamic Analysis of a Waste Shipping Cask
Return to search