Structural Approximations in Multi-Story Buildings
Simplified computer analyses and various approximate hand calculation methods are extremely valuable in structural engineering for multi-story buildings both during the preliminary design...
Computer-Assisted Geometric and Kinematic Analysis of Subsurface Faulting in the Vicinity of Yucca Mountain, Nevada, Using Balanced Geologic Cross Sections
Computer-assisted geological cross section balancing methods are used in the geometric and kinematic analysis of subsurface structures in the vicinity of Yucca Mountain, Nevada, including...
Macro-Model for Inelastic Low-Rise R.C. Shear Walls
This paper presents an analytical technique for calculating static and seismic response of low-rise shear wall structures. The displacement response is resulting from bending, shear, and...
Efficient Elements for Mindlin Beams and Plates
Two improvements to the conventional Mindlin two-node beam and three-node plate are presented. The first involves the order of the assumed displacement fields. The second involves simulation...
Finite Element Evaluation of Thermoviscoplastic Responses of Geomechanical Media Under Finite Deformation
Finite deformation responses of fluid-saturated geological media with thermoviscoplastic solid constituent are evaluated using finite element methods. The coupled nonlinear governing equations...
Healing or Negative Damage in Concrete
The deformation of concrete may be attributed to damage or the evolution of microcracks and to mechanical healing or the closing of microcracks. For damage, dissipation is positive but...
Large Deformation Analysis of Cardiac Structures
The finite element technique can be used to simulate the response of the cardiac structures that have complex shape and geometry and nonlinear material properties. This paper enumerates...
Modelling of Tubes with Large Plastic Deformation
A thin circular tube laterally compressed between two rigid plates is investigated for its load(P)-displacement(?) behaviour. The moving hinge concept yields a good prediction compared...
Buckling of Lamianted Plates Using h-p Finite Strips
The paper presents a computationally efficient alternative to the finite element method for the initial buckling analysis of long, shear-deformable composite laminates. In addition the...
A Comparison of Modeling Techniques for the Buckling of Stiffened Shells
Different techniques are used to compute the collapse loads of a family of stiffened shells. Large differences are observed between the various predictions. Detailed numerical studies...
Stability Analysis of Nonlinear Frames
The second stiffness method for large deformation in-elastic stability analysis of frames is discussed. Displacement control methods for tracing the path beyond the limit point are presented....
A Mixture Finite Element for Reinforced Concrete
A semi-analytical finite element is presented for analyses of cracked reinforced concrete (RC) structures including bond action between rebar and concrete, and crack-face shear transfer....
Moisture Diffusion in Concrete and Mechanisms of Drying Creep
The Pickett effect is the excess of creep at drying over the sum of shrinkage and basic creep. Several theoretical models have been presented to speculate on the mechanisms of this effect,...
Deformation of Concrete Due to Drying
The deformation of drying concrete is numerically investigated considering the effect of random arrangement of coarse aggregates. The result indicates that a part of the statistical variation...
Influence of Finite Deformations in the Stress-Strain Modelling of Granular Media
An incremental formulations of the stress-strain law is presented for quasi-static deformation of granular solids. The stress-strain relationship is derived for an element of granular...
Constitutive Relations for Large Deformation Plasticity
Influence of the choice of measures of stress and deformation upon the representation of constitutive relations for elasto-plastic solids undergoing finite deformation is discussed. The...
Modeling of Successive Impacts in Sand
The principal aspects of numerical modeling of successive, high energy impacts in sand are discussed in this paper. These include the numerical formulation used for solution of the equations...
Constitutive Relations for Granular Solids Accounting for Heterogeneous Deformation Fields
Under high deviatoric stress levels corresponding to large strains, the deformation of granular media is highly heterogeneous. A micro-mechanical approach is developed here to model the...
Simulation of the Quasi-Static Deformation of 2D Assemblages of Rigid Discs
Although the importance of dilatancy in the constitutive behaviour of granular materials has been recognized for some time, conclusions about its evolution and dependence on different...
Determination of the Deformation Characteristics of a Jet-Grouted Shallow Tunnel in Alluvial Deposits by Means of In-Situ Measurements and Back Analysis
The deformation characteristics of a jet-grouted shallow tunnel in alluvial deposits are investigated. An intensive in-situ measuring program accompanied each of the various excavation...
Return to search