Calibration of Jackup Leg Foundation Model Using Full-Scale Structural Measurements
The fitness of jack-up rigs to operate in varying water depths and weather conditions is determined by "site-specific" structural assessments. These assessments are conducted by a wide range of companies...

Whose "Fault" Is This? Overcoming Faulting and Ancient Landslides in a Dam Abutment
The Calaveras Dam Replacement Project (CDRP) is the largest project in the San Francisco Public Utilities Commission's (SFPUC) $4.8 billion, multi-year Water System Improvement Program (WSIP). The program...

When Things Became Muddy: TVA's Response to Seepage Discharge at Boone Dam
In October 2014, the Tennessee Valley Authority (TVA) profited from investments in a robust dam safety program. This profit did not come in the form of money, but more importantly in the protection of...

Dam Safety Management Using Risk-Informed Decision-Making Methods: A Powerful Tool or an Unnecessary Venture?
This article discusses design standards, safety methods, and risk-informed decision-making methods for dams....

Tailings Dam Engineer of Record (EoR): There's Nothing Conventional About It
Engineer of Record (EoR) is a simple and resolute concept that's applied throughout the western world for civil works construction. It's a term that fits in a nice neat box; it represents a single person...

Conowingo Dam, By John R. Paulson with Erin E. Paulson. Charleston, South Carolina: Arcadia Publishing, 2017

Restoring Steinbeck's Carmel River: The Removal of San Clemente Dam
If you've read John Steinbeck's 1945 classic "Cannery Row," then you're already familiar with the Carmel River, which he described as "…a lovely little river. It isn't very long, but in its course it has...

Tailings Impoundment Closure: It's All in the Eye of the Beholder
Since the early 1900s, the mining and power-generation industries have disposed of tailings and other waste products using impoundments. The term "tailings" typically refers to the fine-grained waste product...

Foundation Reuse and Enhancement: A Viable Option for Bridge Widening and Replacement Projects
The transportation system in the U.S. includes over 607,000 bridges for grade separations, interchange configurations, and stream crossings. As governmental entities embark on the rehabilitation and rebuilding...

What Does the Case Law Say? Geotechnical Risk on Design-Build Projects
The growth of design-build (DB) contracting, particularly on public-sector civil projects, has generated a great deal of industry discussion over the age-old question of who should bear the risk of unforeseen...

A History of Deep Vibratory Methods for Ground Improvement
A Cost-Effective Foundation Solution for 80+ Years
Deep vibratory ground improvement methods, collectively referred to as vibro systems, have been utilized by the construction community in one form or another for the past 80 years. Development of the equipment,...

Ground Improvement for Underground Construction
The Good, the Bad, and the Ugly
Underground construction is "special" because the work may be performed at great depths and under high groundwater pressures. All too often, it seems to take place in urban areas where there is limited...

The 2010-2011 Canterbury, New Zealand, Earthquake Sequence
Impetus for Rethinking the Way We Evaluate and Mitigate Liquefaction
Liquefaction is a common cause of ground failure during earthquakes and is directly responsible for tremendous damage to infrastructure. Evidence of the impact of liquefaction includes failure of bridge...

A Foundation Engineering Trip Down the Mississippi: Foundations for Mississippi River Bridges from Minnesota to Louisiana
Huckleberry Finn had his adventure, but for those interested in foundation engineering, this article will float you down the Mississippi River on your own encounter with the many bridges...

Spread Footings Revisited: Geotechnical Advances Lead to Expanded Use for Bridge Abutments
The Minnesota Department of Transportation (MnDOT) has historically used steel shell piles to support highway bridge structures, probably due to a blend of familiarity and efficiency among...

Screw Piles and Helical Anchors: 180 Years of Use in Geotechnical Engineering
Since 1836, screw piles and screw cylinders have been used successfully throughout the world to support a variety of large-scale, civil engineering structures. Their development and use...

Foundation Engineering...102
Most of our textbooks still separate foundation options into two simplistic categories: shallow or deep. That's why so many of us are geared toward thinking about the foundation...

Evaluating Bridges With Unknown Foundations for Susceptibility to Scour: North Carolina Applies Risk-Based Guidelines to Over 3,750 Bridges
Scour occurs when flowing water removes erodible material such as sand and rock. For bridges over water, scour affects the stability of pier and abutment foundations and contributes to...

Structural Members and Connections Used in Foundations
This chapter specifies design procedures for steel members and connections embedded in concrete foundations or the earth. Additional design requirements for structural members and connections...

Findings From a Joint Industry Study on Foundation Fixity of Jackup Units
During the design storm conditions the soil supporting jack-up unit footings may be close to, or at plastic failure. Accordingly, the use of elastic solutions to the problems of foundation...

 

 

 

 

Return to search