Rainfall-Runoff Modeling for Watershed Stormwater Management
In the design of watershed stormwater management plans used for land development, the Pennsylvania State Runoff Model (PSRM) presents upstream subbasin flows that contribute to the peak...
Development of the San Joaquin County Hydrology Manual
A hydrology manual was prepared for the County of San Joaquin, California for the determination of storm runoff quantities for the design of flood management facilities, floodplain analysis,...
Computing Flood Damage Reduction Accomplishment
Following flood events, the damage reduced by a federal flood damage reduction project must be computed to inform the public and assist officials in making decisions. This paper will describe...
Computer Optimization of a Groundwater Treatment Facility
A computer model has been developed to optimize the operation of a groundwater oil recovery treatment plant. The site consists of 24 pump and treat recovery wells which lead to a treatment...
Risk-based Analysis of Major Rehabilitation of Hydraulic Structures Using REPAIR
This poster session presents a demonstration of a computer model developed by the Corps of Engineers to analyze investment proposals. The primary purpose of the model is evaluate investments...
Computational Tools for Subsurface Conceptualization
Development of subsurface conceptual models for use in groundwater flow and transport modeling requires that existing data in the form of boring logs, cone penetrometer (CPT) logs, geophysical...
Development of Remediation Technologies Simulators
This paper summarizes on.going efforts to develop software for simulating various in situ, subsurface remediation technologies to improve remediation selection, design, and operation....
Subcatchment Parameterization for Runoff Modeling Using Digital Elevation Models
Numerical algorithms are presented to estimate the length, width and slope of rectangular planes representing irregularly shaped overland contributing areas defined on raster Digital Elevation...
Effects of Spatial Data Resolution and Subarea Size on a Distributed Runoff Model
Spatial data layers of elevation, land use, and soils for a small agricultural watershed in Pennsylvania were used to study the effect of resolution degradation of raster data on the output...
Automated Tools for Spatially Distributed Rainfall/Runoff Modeling
A watershed modeling system (WMS) has been developed to address the needs of surface water rainfall/runoff computer simulations. WMS, developed at the Engineering Computer Graphics Laboratory...
Results of a GIS/HEC-1 Interface Module
Great strives have been made in recent years to automate the S.C.S. curve number weighting process required for large-scale watershed modeling utilizing Geographic Information System (GIS)...
Restoration of Abandoned Meanders on the Middle Fork Forked Deer River, Tennessee
The Middle Fork Forked Deer River in western Tennessee historically had a sinuous course within a wide floodplain. In the early 1900's, local interests dug large straight...
SAMS: Software for Simulating Streamflow Series
This paper introduces SAMS, a computer software developed for the analysis, modeling, and generation of hydrologic time series such as annual and monthly streamfiows. It is written in...
Verification of a 3D Flow Model Using Laboratory Data
The ASCE Task Sub-Committee on 3D Free Surface Flow Model Veri fications has been developing test cases and/or procedures for both computational model developers and users over the past...
Simulation of Dissolved Oxygen in Sacramento-San Joaquin Delta
A one-dimensional model has been developed to simulate water quality in a complex multi-channel estuarine system. The model utilizes a Lagrangian reference frame for transport computations....
Increasing Computational Accuracy of Radial Gate Flows
Radial (Tainter) gates are the most widely used flow control structure on large, open channel conveyance systems. In contrast, the hydraulic forces are complicated and this type of gate...
Field Determination of Flow through a Pressure Regulating Valve
This paper presents a computer methodology to calculate flow through a pressure regulating valve for different opening percentages and a given pressure differential. The methodology is...
Numerical Simulation of Bridge Abutment Scour Development
This paper reports a project to simulate the development of a local scour hole around a bridge abutment by a computational model. From the prelim inary results obtained, it may be concluded...
Data Analysis for Computer Modeling of Thermal Discharges
Assessment of the thermal discharge impact upon the environment and design of the appropriate discharge structure necessitate a range of data activities, from extensive field measurements,...
The HEC NexGen Software Development Project
The NexGen project is developing successor software packages to the existing family of HEC computer programs. Development is occurring via teams comprised of technical specialists, computer...
Return to search