Design of Tension Member Insulated Anchor for Arctic Pipelines
This paper explores the latest development in above-ground waterflood pipe anchors currently being used on the SOHIO operated portion of the Prudhoe Bay Oil Field. The objective of the...
Single Point Moorings for the Bering Sea
Multi or single-legged buoy systems such as conventional CALMs or SALMs would not survive the winter season in the Bering Sea because the forces generated in the anchoring chains by pack-ice...
Uplift Behavior of Shallow Soil Anchors?An Overview
An overview is presented of the static uplift (tensile) behavior of shallow anchors used for foundations in soil. Basic anchor types are described, and their general installation and behavioral...
The Uplift Capacity of Helix Anchors in Sand
Results of field and laboratory investigations of the uplift capacity of helix anchors in sand are presented. Equipment and instrumentation were used to measure uplift load, anchor deflection...
Uplift Capacity of Helical Anchors in Clay and Silt
The results of a study on the uplift capacity of helical anchors in clay and silt are presented. Full-scale field tests and one-quarter scale laboratory tests were conducted in each soil...
Resistance of Shallow Inclined Anchors in Clay
Some recent laboratory model test results for the ultimate pullout resistance of a square anchor inclined at angles of 0, 20, 50, 75, and 90 degrees with respect to the horizontal have...
Uplift Behavior of Anchor Foundations in Soil
This publication includes a series of studies which provide a general and consistent framework for the design of anchors in uplift. The papers are presented in three groups: (1) State-of-the-art...
Retaining Wall
The foundation of this off-ramp in Manchester, New Hampshire is made up of end-bearing piles and sloping rock anchors�an innovation that is unique to the United States. End bearing piles...
Simplified Design of Flexible Expansion Anchored Plates for Nuclear Structures
The following two phases of the design of expansion anchored plates are discussed in this paper. a) Initial Design. b) Reassessment of as-built conditions. Initial design refers to the...
State-of-the-Art Report on Steel Embedments
The basic philosophy underlying the design of steel embedments may be summarized as follows: (1) If an attachment can be located such that a group of cast-in-place anchors can be used...
Holding Capacity of Vertical Anchor Slabs in Granular Soil
Tiebacks for Waterfront Bulkheads
Yielding Load of Anchor in Sand
The Analysis of Wall Supports to Stabilize Slopes
Ground Anchors in Atlanta
Nuclear Construction Concrete Anchor Experiences
Effects of Directional Sea In Model Testing
The Use of Anchored Beach Systems in Metro Toronto
Tiebacks Support Excavations Without Bracing
Tiebacks are used to support earth retaining walls in deep excavations without using internal bracing. Although more expensive than bracing to construct, tiebacks can result in overall...
The Application of Shotcrete in the NATM
Return to search