The ASCE Standardized Reference Evapotranspiration Equationby Richard G. Allen, (editor),
Ivan A. Walter, (editor),
Ronald L. Elliott, (editor),
Terry A. Howell, (editor),
Daniel Itenfisu, (editor),
Marvin E. Jensen, (editor),
Richard L. Snyder, (editor),
American Society of Civil Engineers/The Irrigation Association, Reston, VA
978-0-7844-0805-6 (ISBN-13) | 0-7844-0805-X (ISBN-10), 2005, Soft Cover, Pg. various
28 cm., Prepared by the Task Committee on Standardization of Reference Evapotranspiration of the Environmental and Water Resources In
Out of Print: Not available at ASCE Bookstore.
Document Type: Book
Prepared by the Task Committee on Standardization of Reference Evapotranspiration of the Environmental and Water Resources Institute of ASCE.
This report provides standardized equations for calculating reference evapotranspiration (ET) from weather data and procedures for quality assessment and control of weather data. The purpose of the standardized reference ET equation and calculation procedures is to bring commonality to the calculation of reference ET and to provide a standardized basis for determining or transferring crop coefficients for agriculture and landscape use.
The basis of the standardized reference ET equation is the ASCE Penman-Monteith (ASCE-PM) method discussed in ASCE Manual of Practice 70,
The development of this standardized report was made at the request of, and has been endorsed by, the Irrigation Association.
Subject Headings: Evapotranspiration | Weather forecasting | Water quality | Water resources | Hydrologic data | Irrigation water | Quality control |
Return to search