Fiber Reinforced Concrete Extrusion

by Ronald F. Zollo, (M.ASCE), Asst. Prof. of Civ.Engrg.; Univ. of Miami, Coral Gables, Fla.,

Serial Information: Journal of the Structural Division, 1975, Vol. 101, Issue 12, Pg. 2573-2583

Document Type: Journal Paper

Abstract: Results of tests involving extrusion of fibrous concrete (FRC) indicate the feasibility of the process. Extrusion through a stationary die proves beneficial to the mechanisms governing material behavior. The results of flexure tests are considered for extruded steel and glass fibrous concrete. The extrusion process caused a reorientation of originally randomly-oriented fibers toward an alignment parallel to the axis of extrusion, which is favorable with respect to flexural strengthening. An asbestos-cement filler provided a matrix strengthened by the addition of both glass and steel fibers. Clay fillers were weaker.

Subject Headings: Fibers | Glass | Flexural strength | Fiber reinforced concrete | Feasibility studies | Mechanical properties | Steel |

Services: Buy this book/Buy this article


Return to search